Crown XLI3500 Crown Audio Stereo Power Amplifier (DEMO)
Designed for musicians, DJs, entertainers, houses of worship, discos, and other venues, theCrown XLi 3500 Stereo Power Amplifierfeature both RCA and XLR inputs as well as Speakon and binding post outputs. The amplifier includes a user selectable input sens
Designed for musicians, DJs, entertainers, houses of worship, discos, and other venues, theCrown XLi 3500 Stereo Power Amplifierfeature both RCA and XLR inputs as well as Speakon and binding post outputs. The amplifier includes a user selectable input sensitivity of 0.755V or 1.4V, stereo/parallel-bridge-mono modes, power/fault/signal presence/clip LED indicators, forced air cooling, and protection against shorts, no-load, on/off thumps, and interference from radio frequencies in the environment.Drawing from over six decades of experience in building amplifiers, the unit is capable of delivering 1350W per channel at 4 ohms, 1000W per channel at 8 ohms, and 2700W at 8 ohms in bridged-mono mode..
Specifications
| Input | 2x electronically balanced XLR-3F 2x electronically balanced RCA |
| Output | 2x binding post 2x Speakon outputs |
| THD | <0.5% from 20 to 20,000 Hz |
| Intermodulation Distortion | 0.35% (60 Hz and 7,000 Hz at 4:1 from full rated output to -30 dB) |
| Slew Rate | >10 V/us |
| Voltage Gain | 36 dB |
| Damping Factor | 8 Ohm, 10 to 400 Hz: > 200 |
| Signal to Noise Ratio | > 100 dB |
| Crosstalk | Below rated power: -75 dB 20 to 1,000 Hz:-59 dB |
| Input Sensitivity | For full rated power at 8 ohms: 0.775 or 1.4 V |
| Input Impedance | Nominal balanced: 20 kilOhm Unbalanced: 10 kilOhm |
| AC Line Power | (+10%) 120V~60 Hz 220V~50/60 Hz 230-240V~50/60 Hz |
| IEC | 15 A |
| Dimensions | 19 x 3.5 x 14.4″ (48.3 x 8.9 x 36.6 cm) |
| Weight | 43.0 lb (19.5 kg) |
Reviews
There are no reviews yet.