Use the 2-channel remote switch to control theWalrus Audios Two Channel Remote Switch is built specifically to give you remote control over the Descent and Vanguards preset and bypass footswitches. This means you can stick either of those two stompboxes at the back of your pedalboard and use the Two Channel Remote Switch to free up valuable space at the front. The preset footswitch lets you cycle between presets. The bypass engages and disengages the effect when used as a latching switch, but it can also act as a preset save switch when held down until the preset LED starts flashing.

Features:

• Preset Footswitch: Changes between presets Bypass Footswitch / Preset Save: Push down Bypass to turn the pedal on and off. To save a setting and add the setting to your bank of presets, hold the Bypass footswitch down until the ‘Preset’ LED flashes.
• Use the 2-channel remote switch to control the Descent and Vanguard’s two footswitches
• This feature allows you to place the Descent at the back of your pedal board and run the small remote control switch to the front of your board, freeing up real estate on your boards front row
• To use the Remote option with this 2-channel remote switch, a TRS cable is required
• Use the 2-channel remote switch to control the Descent and Vanguard’s two footswitches Descent and Vanguard’s two foot switches. This feature allows you to place the Descent at the back of your pedal board and run the small remote control switch to the front of your board; freeing up real estate on your boards front row. To use the Remote option with this 2-channel remote switch, a TRS cable is required.